Shears & Tools
Onoyoshi – PRUNING SHEARS (200mm)
$130.00Onoyoshi Hamono ステンA型剪定8インチ 200mm ● Forged and handmade pruning shears that continue to preserve tradition while pursuing new design and ease of use. ● For cutting work such as pruning branches. ● The special stainless steel is resistant to rust and the surface is mirror-polished. Approximately 20cm (7.8in) Blade Length 65mm (2.5in) Material: stainless steel Country of Origin: Japan Comes with 1 replacement spring *Because it is handmade with natural materials, the shape, color, and size may differ slightly from the photo. Care *Keep the shears dry after use *Remove dirt frequently *In case of sharpening, don't sharpen the back of the blade *Create a backing angle at the tip that should be about 15 to 20°. The size of the backing should be 0.3 to 0.5 mm (0.011in to 0.019in). *Apply oil to all moving parts of the blades.
Onoyoshi – TRIMMING SHEARS (270mm)
$165.00Onoyoshi Hamono おの義刃物 剪定鋏 片手刈込鋏 太型 ガード付 270mm ● Forged and handmade pruning shears that continue to preserve tradition while pursuing new design and ease of use. ● For cutting buds like on topiary bushes. ● The concave finish reduces the clogging of the blade due to sap and tree tar. Approximately 27cm (10.6in) Blade Length 115mm (4.5in) Material: steel Country of Origin: Japan Comes with 1 replacement spring *Because it is handmade with natural materials, the shape, color, and size may differ slightly from the photo. Care *Keep the shears dry after use *Remove dirt frequently *In case of sharpening, don't sharpen the back of the blade *Create a backing angle at the tip that should be about 15 to 20°. The size of the backing should be 0.3 to 0.5 mm (0.011in to 0.019in). *Apply oil to all moving parts of the blades.
Toyama – JAPANESE PRUNING SHEARS (200mm)
$90.00Toyama Hamono 大久保植木鋏 Okubo Uekiya Hasami The Hidehisa secateurs are designed for general garden use. They are ideal for pruning branches, roses, flowers, and houseplants. Each piece is hand forged and sharpened using traditional methods. As such, each tool has its own variations and irregularity. They are all handmade in Japan. You can cut fresh branches until a diameter of 10mm (0.39in). You can have your name graved into the blade of the shears. Allowed are 7 character of romanized font. Please get in contact if you like to have your name saved in. In this case, you will not being able to cancel or return the order! NOT FOR: ● shrubs ● thicker branches ● artificial flowers ● bamboo ● wire Do not use for any other than plants. Approximately 20cm (7.8in) Blade Length 70mm (2.7in) Material: steel Country of Origin: Japan *Because it is handmade with natural materials, the shape, color, and size may differ slightly from the photo. Care These scissors are made with high carbon steel, they can rust if not cared for properly. *Keep the shears dry after use *Remove dirt frequently *Apply oil to all moving parts of the blades, especially when planning to store them for a longer time.
Toyama – PRUNING SHEARS (200mm)
$100.00Toyama Hamono 剪定鋏 YP200 The Hidehisa secateurs are designed for general garden use. They are ideal for pruning branches, roses, flowers, and houseplants. Each piece is hand forged and sharpened using traditional methods. As such, each tool has its own variations and irregularity. They are all handmade in Japan. You can cut fresh branches until a diameter of 15mm (0.59in). You can have your name graved into the blade of the shears. Allowed are 7 character of romanized font. Please get in contact if you like to have your name saved in. In this case, you will not being able to cancel or return the order! NOT FOR: ● shrubs ● artificial flowers ● bamboo ● wire Do not use for any other than plants. Approximately 20cm (7.8in) Blade Length 70mm (2.7in) Material: steel Country of Origin: Japan *Because it is handmade with natural materials, the shape, color, and size may differ slightly from the photo. Care These scissors are made with high carbon steel, they can rust if not cared for properly. *Keep the shears dry after use *Remove dirt frequently *Apply oil to all moving parts of the blades, especially when planning to store them for a longer time.
Yoshioka – BAMBOO FENCE NEEDLE for Kenninjigaki e.g.
$35.00Yoshioka Hamono クリ針 This tool is used for tying palm ropes when creating bamboo fences. Approximately 25cm (9.8in) Material: steel Country of Origin: Japan *Because it is handmade with natural materials, the shape, color, and size may differ slightly from the photo. Care *Keep the shears dry after use *Remove dirt frequently *In case of sharpening, don't sharpen the back of the blade *Create a backing angle at the tip that should be about 15 to 20 °. The size of the backing should be 0.3 to 0.5 mm (0.011in to 0.019in). *Apply oil to all moving parts of the blades.
Yoshioka – PRUNING SHEARS (200mm)
$100.00Yoshioka Hamono Hasami Masamune 鋏正宗 ブラック剪定鋏 青紙 200mm These pruning shears is a gem that is easy to use. It is made of high-quality blue paper steel (aogami). The shears have the right stickiness, abrasion resistance, hardness, durability, and give the best balance. High-quality cutlery Yasugi blue paper steel is forged and quenched in-house to pursue exquisite sharpness and durability. Approximately 20cm (7.8in) Material: blue paper yasugi steel, rubber coating Country of Origin: Japan *Because it is handmade with natural materials, the shape, color, and size may differ slightly from the photo. Care *Keep the shears dry after use *Remove dirt frequently *In case of sharpening, don't sharpen the back of the blade *Create a backing angle at the tip that should be about 15 to 20 °. The size of the backing should be 0.3 to 0.5 mm (0.011in to 0.019in). *Apply oil to all moving parts of the blades.
Yoshioka – PRUNING SHEARS Fe left handed (200mm)
$135.00Yoshioka Hamono Hasami Masamune 鋏正宗 Fe 剪定鋏 ブラックバージョン 青紙 200mm【左利き用】 Fe is the atomic symbol for iron. We have produced these scissors to express the color and texture of iron. The handle is shot blasted to prevent slipping. The spring cushion softens the impact of cutting. The spring cushion is adjusted to stop at the point where it contracts the most. The most favorite steel blue paper is used. It has the best balance of tenacity, wear resistance, hardness, and durability. High-grade blade steel, Yasugi steel Aogami, is forged and quenched in-house for sharpness and durability. Left Handed Whole body Parker surface treatment Approximately 20cm (7.8in) Material: blue paper yasugi steel Handle portion Non-slip shot blast finish Length of blade 60mm from screw to tip Weight: approx. 220g Country of Origin: Japan *Because it is handmade with natural materials, the shape, color, and size may differ slightly from the photo. Care *Keep the shears dry after use *Remove dirt frequently *In case of sharpening, don't sharpen the back of the blade *Create a backing angle at the tip that should be about 15 to 20 °. The size of the backing should be 0.3 to 0.5 mm (0.011in to 0.019in). *Apply oil to all moving parts of the blades.
Yoshioka – PRUNING SHEARS left handed (200mm)
$125.00Yoshioka Hamono Hasami Masamune 鋏正宗 ブラック剪定鋏 青紙 200mm These pruning shears is a gem that is easy to use. It is made of high-quality blue paper steel (aogami). The shears have the right stickiness, abrasion resistance, hardness, durability, and give the best balance. High-quality cutlery Yasugi blue paper steel is forged and quenched in-house to pursue exquisite sharpness and durability. Left Handed Approximately 20cm (7.8in) Material: blue paper yasugi steel, rubber coating Country of Origin: Japan *Because it is handmade with natural materials, the shape, color, and size may differ slightly from the photo. Care *Keep the shears dry after use *Remove dirt frequently *In case of sharpening, don't sharpen the back of the blade *Create a backing angle at the tip that should be about 15 to 20 °. The size of the backing should be 0.3 to 0.5 mm (0.011in to 0.019in). *Apply oil to all moving parts of the blades.
