Additional information
| Weight | 3.9 kg |
|---|---|
| Material | Iron Cast, Wood |
Sale
Kikuwa Brand – Turntable for Bonsai care
Original price was: $200.00.$160.00Current price is: $160.00.
Casting base turntable S
イモノ足回転台 小
The table has a wooden top plate and the rest is made of iron casting.
The table comes with a stopper to fix the rotation.
Top plate diameter: about 270 mm; weight: about 3320 g; load capacity: 20 kg.
Made in Japan
Material: cast iron, wood
Country of Origin: Japan
RELATED PRODUCTS
Yoshioka – BAMBOO FENCE NEEDLE for Kenninjigaki e.g.
$35.00Yoshioka Hamono クリ針 This tool is used for tying palm ropes when creating bamboo fences. Approximately 25cm (9.8in) Material: steel Country of Origin: Japan *Because it is handmade with natural materials, the shape, color, and size may differ slightly from the photo. Care *Keep the shears dry after use *Remove dirt frequently *In case of sharpening, don't sharpen the back of the blade *Create a backing angle at the tip that should be about 15 to 20 °. The size of the backing should be 0.3 to 0.5 mm (0.011in to 0.019in). *Apply oil to all moving parts of the blades.
Yoshioka – PRUNING SHEARS Fe left handed (200mm)
$135.00Yoshioka Hamono Hasami Masamune 鋏正宗 Fe 剪定鋏 ブラックバージョン 青紙 200mm【左利き用】 Fe is the atomic symbol for iron. We have produced these scissors to express the color and texture of iron. The handle is shot blasted to prevent slipping. The spring cushion softens the impact of cutting. The spring cushion is adjusted to stop at the point where it contracts the most. The most favorite steel blue paper is used. It has the best balance of tenacity, wear resistance, hardness, and durability. High-grade blade steel, Yasugi steel Aogami, is forged and quenched in-house for sharpness and durability. Left Handed Whole body Parker surface treatment Approximately 20cm (7.8in) Material: blue paper yasugi steel Handle portion Non-slip shot blast finish Length of blade 60mm from screw to tip Weight: approx. 220g Country of Origin: Japan *Because it is handmade with natural materials, the shape, color, and size may differ slightly from the photo. Care *Keep the shears dry after use *Remove dirt frequently *In case of sharpening, don't sharpen the back of the blade *Create a backing angle at the tip that should be about 15 to 20 °. The size of the backing should be 0.3 to 0.5 mm (0.011in to 0.019in). *Apply oil to all moving parts of the blades.
Yoshioka – PRUNING SHEARS left handed (200mm)
$135.00Yoshioka Hamono Hasami Masamune 鋏正宗 ブラック剪定鋏 青紙 200mm These pruning shears is a gem that is easy to use. It is made of high-quality blue paper steel (aogami). The shears have the right stickiness, abrasion resistance, hardness, durability, and give the best balance. High-quality cutlery Yasugi blue paper steel is forged and quenched in-house to pursue exquisite sharpness and durability. Left Handed Approximately 20cm (7.8in) Material: blue paper yasugi steel, rubber coating Country of Origin: Japan *Because it is handmade with natural materials, the shape, color, and size may differ slightly from the photo. Care *Keep the shears dry after use *Remove dirt frequently *In case of sharpening, don't sharpen the back of the blade *Create a backing angle at the tip that should be about 15 to 20 °. The size of the backing should be 0.3 to 0.5 mm (0.011in to 0.019in). *Apply oil to all moving parts of the blades.
Taketora – BAMBOO GETA Sandals Size 27
$200.00Taketora 虎竹男下駄（LLサイズ）27cm Toratake Geta are stylish paulownia geta made of tiger bamboo. Paulownia wood is light, soft, and highly hygroscopic, so it has long been used as a material for high-end wooden geta. The tiger bamboo cut into precise squares and arranged on the base of the paulownia geta is just beautiful. Japan's only tiger bamboo became geta sandals. Compared to the old days, the opportunities to wear geta have decreased considerably. That's why it's an excellent product for creating a luxurious and relaxing time. When you walk around in these geta, even the usual road will look different! * The pattern of the thong varies. We will choose which pattern to deliver. *The color of the bamboo will change over time. *When storing, please avoid direct sunlight and store in a well-ventilated place. Please note that storage in a non-breathable object such as a plastic bag may cause mold. Approximately 27cm x 12.5cm x 5.5cm (10.6in x 4.9in x 2.1in) Material: tiger bamboo, paulownia geta base Country of Origin: Made in Japan *Because it is handmade with natural materials, the shape, color, and size may differ slightly from the photo.
Taketora – PALM BROOM (mini)
$30.00Taketora 棕櫚箒ミニ A mini broom made by bundling thin fibers called plucked hair from palm bark. Not only can it be used as a tabletop broom, but it is also a convenient broom that is perfect for cleaning small areas in your home, such as scraping dust from windows, sashes, shoji screens, and sliding doors. Since it is water resistant, it can also be used in the garden. The string part of the handle uses hemp palm rope woven from the same palm bark as the broom part. In addition, the palm bark, which is carefully wrapped with copper wire, gives a sense of beauty and robustness that can withstand decades of use. Since hemp palm is a water-resistant material, it can be washed with water Before using the palm broom Although the hemp fiber is dusted off at the finishing stage of the hemp broom, since it is a natural material, hemp palm dust will fall off at the beginning of use. When you receive it, first of all, please put it outside or on a newspaper. How to wash a palm broom Palm is a material that is resistant to water. If it is very dirty, it can be washed with water, but please be careful not to get the wire wet as it will rust. 1. Take care not to get the wire wet, soak it in running water and wash it slowly by combing it with your fingers. 2. Using a scrub brush, etc., trace several times in the direction of the hair ends. 3. After lightly draining the water, avoid direct sunlight and hang in a well-ventilated place to dry. Approximately 14cm (5.5in diameter) Material: Palm Country of Origin: Made in Japan/domestic production (Uses palm bark from China) *Because it is handmade with natural materials, the shape, color, and size may differ slightly from the photo. This item is crafted from natural materials, so it is normal for small parts to shed occasionally. If shedding is excessive, it can often be brushed off or will diminish over time; however, if it appears abnormal, please contact us, and we will gladly arrange a replacement.
Taketora – BAMBOO LADDLE HOLDER (3 sticks)
$22.00Taketora 黒竹柄杓置き（3本） The black bamboo ladle rests (3 sticks) are made of environmentally friendly bamboo. How about a luxurious black bamboo ladle holder for a water bowl in your garden? Approximately 40cm (15.7in) Broom Material: black bamboo Country of Origin: Japan *This is a hand-made product of natural materials. Differences to the pictures may occur.
Toyama – JAPANESE PRUNING SHEARS (200mm)
$90.00Toyama Hamono 大久保植木鋏 Okubo Uekiya Hasami The Hidehisa secateurs are designed for general garden use. They are ideal for pruning branches, roses, flowers, and houseplants. Each piece is hand forged and sharpened using traditional methods. As such, each tool has its own variations and irregularity. They are all handmade in Japan. You can cut fresh branches until a diameter of 10mm (0.39in). You can have your name graved into the blade of the shears. Allowed are 7 character of romanized font. Please get in contact if you like to have your name saved in. In this case, you will not being able to cancel or return the order! NOT FOR: ● shrubs ● thicker branches ● artificial flowers ● bamboo ● wire Do not use for any other than plants. Approximately 20cm (7.8in) Blade Length 70mm (2.7in) Material: steel Country of Origin: Japan *Because it is handmade with natural materials, the shape, color, and size may differ slightly from the photo. Care These scissors are made with high carbon steel, they can rust if not cared for properly. *Keep the shears dry after use *Remove dirt frequently *Apply oil to all moving parts of the blades, especially when planning to store them for a longer time.
Onoyoshi – PRUNING SHEARS (200mm)
$130.00Onoyoshi Hamono ステンA型剪定8インチ 200mm ● Forged and handmade pruning shears that continue to preserve tradition while pursuing new design and ease of use. ● For cutting work such as pruning branches. ● The special stainless steel is resistant to rust and the surface is mirror-polished. Approximately 20cm (7.8in) Blade Length 65mm (2.5in) Material: stainless steel Country of Origin: Japan Comes with 1 replacement spring *Because it is handmade with natural materials, the shape, color, and size may differ slightly from the photo. Care *Keep the shears dry after use *Remove dirt frequently *In case of sharpening, don't sharpen the back of the blade *Create a backing angle at the tip that should be about 15 to 20°. The size of the backing should be 0.3 to 0.5 mm (0.011in to 0.019in). *Apply oil to all moving parts of the blades.
Reviews
There are no reviews yet.